We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Testforce USABird Statistical Power Sensor
Statistical Sampling for
Precise RF Measurement
The Bird line of Statistical Power Sensors take measurement beyond signal average power for complex wireless systems. Because this measurement is no longer a sufficient control variable, the 7022 Series power sensors measure the percentage of time the signal exists at a specific peak-to-average ratio. In the time domain mode, the sensor adds a variety of functions similar to an oscilloscope to our standard suite of measurements.
The statistical power sensor is flexible enough to be used in all known communication formats and is able to accurately provide a wide range of RF measurements for non-periodic signals such as EVDO, UMTS, LTE, and HDTV. Calibration is traceable to NIST standards and no field calibration is required.
PRODUCT FEATURES
■ Provides Forward and Reflected Power, Peak/ Pulse Power, Time Domain and Statistical Measurements
■ Three operating modes: Conventional, Time Domain and Statistical
■ Analytical results of Signal of Interest using CCDF parameters
■ Detailed breakdown of a single or multiple pulses
■ Isolate and identify specific breakpoints with the use of markers
■ Includes a wide range of IEEE pulse parameters
APPLICATIONS
■ Analog Cellular, Digital Cellular, 3G, 4G, Tetra, APCO/P25 Phase 1 & 2, DMR, MOTOTRBO, Tunking, CDMA, TDMA, WCDMA, GSM, Transportation, Tactical Military, Radar, Avionics, Marine, LMR, Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Public Safety, Telematics, Utilities, WIMAX, WLAN, EVDO, UMTS, LTE, and HDT
| Model | Frequency Range | Power Range | Interface Specs Ω |
|---|---|---|---|
| 7022 | 350 MHz to 6 GHz | N/A | N/A |
SKU
Bird Statistical Power Sensor Family
Manufacturer
Bird Electronic Corporation
Model
Bird Statistical Power Sensor
Storage Temperature
–40 to +80 °C (–40 to +176 °F)
Time Base Accuracy
0.0001
Time Resolution
50nSec to 10 Sec
Frequency Measurement Accuracy
± 3MHz with CW signals
Trigger Input Connector
BNC (Female) (1MΩ Impedance; 3V High, 1.2V Low)
Certifications
EMC Directive (2004/108/EC) European Standard: EN 61326— Electrical Equipment for measurement, control and laboratory use; EMC
Requirements Test Spec (for radiated immunity): EN 61000-4-3—Testing and measurement techniques - 10V/meter
CE Mark
RoHS
Points Per Screen
1001
Display Refresh Rate
10 times/ sec (Limited by communication)
Power measurement range
0.25 W to 500 W average, Average Power Rating limited (see datasheet)
Video Bandwidth
Settable: 20 MHz (none), 5 MHz, 400 kHz, 4.5 kHz
Mechanical Shock and Vibration
IAW MIL-PRF-28800F class 3
Data Logging
Yes, with the VPM3, Virtual Power Meter Software
Frequency Range
350 MHz to 6 GHz
Connectors
Type-N (Female)
Impedance
50 Ohms
Peak Average Ratio
12 dB, absolute peak power limited to 1500W
Insertion VSWR
1.065 350 to 2000 MHz (max) | 1.12, 2000 to 6000 MHz (max)
Power Supply
USB Port
Humidity
95% (max), non-condensing
Recommended Calibration Interval
Factory: NIST Traceable | Field: No Field Calibration Required
Dimensions (L x W x H)
5.9 in x 4.8 in x 1.3 in (150 mm x 122 mm x 33 mm), nominal
Weight
1.5 lbs (max)
Dynamic Range
33 dB
Directivity
<-30 dB, 350 to 1000 MHz (min)
<-28 dB, 1000 to 6000 MHz (min)
<-24 dB, 4000 to 6000 MHz (min)
Sample Rate
44 M Samples/s (max)
Interface
USB 2.0 Type B (USBTMC)
Other Specifications/Notes
Series average/range values; Select your model to see its specifications