We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Testforce USAAnritsu Field Master Pro MS2090A
Field Master™
Handheld Spectrum Analyzer delivers the highest continuous frequency coverage up to 54 GHz and real-time spectrum analysis bandwidth up to 110 MHz to address current and emerging applications
Frequency Range: 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar.
The Field Master Pro MS2090A delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer, with a displayed average noise level (DANL) of -164 dBm and Third Order Intercept (TOI) of +20 dBm (typical). This makes measurements such as spectrum clearing, radio alignment, harmonic, and distortion even more accurate than previously possible. For modulation measurements on digital systems, 110 MHz modulation bandwidth coupled with best-in-class phase noise performance maximizes measurement precision, while ±0.5 dB typical amplitude accuracy provides confidence when testing transmitter power and spurious.
Ruggedized for field use, all versions provide a comprehensive range of features to speed and simplify measurement, as well as enhance usability. RTSA spans of 22 MHz to 110 MHz (option dependent) provide capability for cellular interference monitoring to full ISM band signal analysis. In addition to being a full span swept tuned spectrum analyzer, all versions include a spectrogram display that helps monitor the RF spectrum for intermittent or interfering signals. Integrated channel power and occupied bandwidth measurements simplify the measuring and characterizing of common radio transmission. Cable and Antenna line sweep measurements are supported with the addition of the S331P Site Master. IQ data capture of 5G frames enables the capture and saving of IQ data for off-line processing on a PC using standard data analysis tools.
Features
- 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
- DANL: -164 dBm (with preamp)
- TOI: +20 dBm (typical)
- Analysis bandwidth: 110 MHz
- Amp range: DANL to +30 dBm
- Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
- Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
- Resolution bandwidth (RBW): 1 Hz to 10 MHz
- RTSA bandwidth: 22, 55, 110 MHz (option dependent)
- Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
- Zero span with 60 ns minimum span
- IQ capture and streaming
- AM/FM modulation quality measurements
- Built-in PDF/HTML report generation
- EMF Measurements
- Uplink/Downlink interference analysis
- Interference hunting
Mobile InterferenceHunter
Anritsu Mobile Interference Hunting System — Quick. Reliable. Multi-Emitter.
Anritsu’s Mobile InterferenceHunter MX280007A is a quick and reliable way to find single or multiple sources of interference. The ability to work with multiple signal sources, reflections, RF shadows, drifting signals, bursty signals, and multi-path distinguish the Mobile InterferenceHunter MX280007A from more expensive solutions targeted at single fixed frequency interference sources.
The Mobile InterferenceHunter’s post-capture analysis capability allows users to modify search parameters without re-driving the route. This allows re-analysis of the captured data as well as consulting with experts.
The Mobile InterferenceHunter works with the broad array of Anritsu’s handheld spectrum analyzers, providing interference hunting and spectrum clearing capability from 9 kHz to 54 GHz. The Mobile InterferenceHunter is a quick, reliable, and multi-emitter enabled solution to your interference hunting and spectrum clearing needs.
Isotropic EMF Probe
2000-1985-R Isotropic EMF Probe for use with Option 445
The 2000-1985-R Isotropic EMF Probe, in conjunction with MS2090A Option 445 EMF Meter, offers a broadband EMF measurement from 20 MHz to 40 GHz with excellent accuracy and speed. Simply connect the probe to a USB port on the Field Master Pro, open the EMF Meter application (requires Option 445) and easily measure the EMF energy as a percentage of FCC public, FCC technician, ICNIRP public, or ICNIRP public limits.
IQ Capture and Analysis
PC based IQ analysis software for use with IQ data captured from a Remote Spectrum Analyzer
IQ Signal Master MX280005A Vector Signal Analysis Software provides a comprehensive suite of measurements that deliver post processing and analysis of IQ data files captured on the Field Master Pro spectrum analyzers. The software is designed to bring together all the essential tools required to capture IQ data files and then gain critical insights into the nature of the captured signals. Modes within the application, support the ability to capture or stream IQ data into the PC memory, perform modulation quality measurements, playback IQ data with high frequency and time resolution, view LTE and 5G frame resource blocks and playback IQ spectrograms from up to four analyzers in parallel.
A file conversion mode allows IQ data captured on the supported analyzers to be converted to the format required for playback using a Vector Signal Generator MG3710E further enhancing the overall capability.
The software is designed for national RF spectrum regulators, security agencies and defense electronics companies who need to gain critical insight into RF signals that have been captured in the field. It is also suitable for organizations that need to monitor and protect RF spectrum from unlicensed operators or unintended sources of interference
IQ Data can be captured or streamed to a PC via USB, Ethernet, or PCIe interface using the MA25101A IQ Streaming PCIe kit.
MA25424A IQ Data Converter is required in order to stream data from the Field Master Pro MS2090A spectrum analyzer to the Bird IQC5000B RF record and playback system.
Industries
- Avionics and Aircraft Manufacturing
- Radar and Electronic Peacekeeping
- Satellite Communications
Technologies
- Bluetooth Wireless Technology
- Interference Hunting
Delivering the highest levels of performance available in a handheld RF spectrum analyzer, the Field Master Pro MS2090A instrument gives field engineers and technicians unparalleled measurement accuracy previously reserved for only benchtop instruments.
- Interference hunting and spectrum clearing – fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference.
- Broadcast transmitter analysis – a comprehensive range of transmitter measurements – including: AM/FM modulation quality measurements, harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirements.
- Microwave radio links – with a frequency option up to 54 GHz and exceptional sensitivity for dish alignment, power and modulation bandwidth can be verified during installation or maintenance testing with a waveguide horn antenna.
- Satellite system monitoring – ideal for monitoring downlink signals to search for interference and noise
- Pulse Radar Measurements - The wide bandwidth of the MS2090A enables detailed analysis of pulsed radar signals. In zero span, resolution bandwidth can be set as high as 40 MHz (option dependent), enabling a sweep time as low as 60 ns and amplitude measurements of pulses as narrow as 20 ns.
- LTE base station measurements – OTA or direct connect measurements in single or multi channel configurations
- Cell ID, Sector ID, Cell Group
- Frequency Error and Time Offset
- PBCH, RS, and SS Power
- Signal Quality (EVM)
- MIMO Antenna Power and Time Alignment Error (TAE)
- Channel Power and Occupied Bandwidth
- TDD Frame Power
- ACLR and Spectral Emissions Masks
- Time Alignment Error
- Resource Block Usage
- OFDM Symbol Transmit Power (OSTP)
- Time gated Uplink interference measurements
- RSRP based coverage mapping with PCI information
- Multi frequency network measurements with carrier aggregation
- 5GNR base station measurement – validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15, including:
- frequency error
- time offset
- cell/sector ID
- SSB: RSRP, RSRQ, SINR
- modulation quality
- unwanted emissions
- occupied bandwidth
- adjacent channel leakage ratio
- transmitter harmonics and spurious
- EIRP
- Time gated Uplink interference measurements
- RSRP based coverage mapping with PCI information
- Multi frequency network measurements with carrier aggregation
- LTE and 5G coverage mapping – receive a clear representation of the signal strength of 5G transmitters over intended geographic area by continuously measuring RF data – including 5G channel power, EIRP, or RSRP – with results graphically displayed on a digital map or building floor plan.
- Cable and Antenna measurements – Line sweep RF cables and antennas at base station locations with accessory S331P Site Master
SKU
MS2090A
Manufacturer
Anritsu
Model
MS2090A
Frequency Range
MS2090A-0709 9 kHz to 9 GHz, MS2090A-0714 9 kHz to 14 GHz, MS2090A-0720 9 kHz to 20 GHz, MS2090A-0726 9 kHz to 26.5 GHz, MS2090A-0732 9 kHz to 32 GHz, MS2090A-0743 9 kHz to 43.5 GHz, MS2090A-0754 9 kHz to 54 GHz
Analysis bandwidth
110 MHz
TOI
+20 dBm
SWR
1.5 (input)
Amplitude Range
DANL to +30 dBm
Amplitude Accuracy
< 14 GHz ±1.3 dB (±0.5 dB typical)
Resolution bandwidth
1 Hz to 10 MHz
RTSA bandwidth
22, 55, 110 MHz (option dependent)
Demodulation
5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
Phase noise
at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
DANL
-164 dBm (w/preamp)