Calibrators

68-Pin Male VHDCI to 68-Pin Female D-SUB, Twisted Pair, Shielded Multifunction Cable

SCB-68A Noise Rejecting, Shielded I/O Connector Block

PCI Express, 32 AI, (16-Bit, 1.25 MS/s), 4 AO (2.86 MS/s), 48 DIO Multifunction I/O Device

The Analog Discovery 2 – NI Edition is a pocket-sized device that transforms any PC into an electrical engineering workstation.

PXIe, 5-Slot, Up to 250 MB/s PXI Chassis—The PXIe‑1073 is designed for a wide range of test and measurement applications and provides a high-bandwidth backplane and an integrated MXI‑Express controller. The chassis features compact, rugged packaging as well as acoustically quiet operation, which makes it ideal for both portable and desktop systems.

With its hands-on approach, educators can help students learn practical, experimental engineering skills.

NI PXIe-1085, 18-Slot 3U PXI Express Chassis, 12 GB/s System BW

The PXIe-8135 is an Intel Core i7 embedded controller for PXI Express systems. It is used for processor-intensive, modular instrumentation, and data acquisition applications. The PXIe-8135 includes two 10/100/1000BASE-TX (Gigabit) Ethernet ports, two SuperSpeed USB ports, and four Hi-Speed USB ports, as well as an integrated hard drive, serial port, and other peripheral I/O. 

The PXIe‑7976 provides flexible, customizable I/O for LabVIEW FPGA. It includes 132 single-ended I/O lines configurable as 66 differential pairs. You can pair the PXIe‑7976 with FlexRIO adapter modules that offer high-performance analog and digital I/O. Together, the two modules create a reconfigurable instrument that you can program with LabVIEW FPGA software. The PXIe‑7976 supports peer‑to‑peer streaming, which directly transfers data among multiple FPGA modules or select PXI Express modules without sending data to the host processor. With this feature, you can add FPGA capabilities to high-performance NI digitizers with NIST‑traceable calibration or expand your FPGA algorithms across multiple FPGAs for computationally demanding applications. 

PXIe-1082, 8-Slot 3U PXI Express Chassis

The NI‑9213 is a high-density thermocouple input module that is designed for higher channel count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots. The NI‑9213 includes anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements. The NI‑9213 features NIST‑traceable calibration and a channel‑to‑earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range.  

The NI‑9219 is designed for multipurpose testing. With the NI‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.  

Five Benchtop Instruments. One Unified Interface. VirtualBench plays a key role in reducing the cost and footprint of test and measurement systems by consolidating five of the most commonly used instruments into one device without compromising the performance of each instrument. Combined with a modern software experience and simple programming interface, VirtualBench creates new efficiencies for engineers interacting with benchtop test equipment or developing low-cost automated test systems. The VirtualBench hardware family currently consists of three models most easily designated by oscilloscope analog bandwidth: 100, 350, and 500 MHz. These models allow the VirtualBench family to serve a wide range of applications and price points in academic labs, hardware characterization/debug benches, and automated test systems.

NI Multisim is an intuitive schematic capture and SPICE simulation circuit teaching environment. With specific Multisim features designed for the educator to foster learning and guide student exploration of circuit concepts, you can provide your students with an interactive environment to visualize circuit behavior with powerful simulation and analysis while abstracting the complexity of SPICE syntax. Learn about instrumentation and troubleshooting using simulation-driven instruments and hidden faults, and develop intuition by having students explore “what if” scenarios with interactive components and advance simulation.

The Digital Communications Teaching bundle provides relevant, hands-on laboratory learning in RF and communications as an affordable teaching solution. The NI USRP hardware and LabVIEW software combination offers students a unique and relevant opportunity to experiment with a wide range of real-world signals in introductory communications and digital communications laboratories. With this solution, students can focus on the practical implementation of theoretical algorithms and real-world impairments earlier in the curriculum. This includes ready-to-teach digital communications courseware by Professor Robert W. Heather Jr., Ph.D., P.E., transmit/recieve pair of NI USRP-2920 (50MHz to 2.2GHz), covers FM radio, GPS, GSM, radar, and ISM bands, and includes NI technical support and 1-year extendable warranty.