We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Testforce USATektronix Low Voltage Differential Oscilloscope Probes
As low as USD$3,290.00
In stock
Differential signaling used in high speed serial standards requires very accurate characterization. The industry-leading bandwidth and signal fidelity found in a Tektronix low voltage differential oscilloscope probe ensures that you see every possible detail. Tektronix offers TriMode™ architecture which streamlines measurement acquisition by enabling you to make differential, single-ended, and common mode measurements with a single connection!
| Model | Description |
|---|---|
| ADA400A | AMPLIFIER, DIFF; MICROVOLT, DIFFERENTIAL, - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD |
| TDP1500 | Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI |
| P6247 | PROBE,DIFF,ACT; 1GHZ BW,+/- 0.85/8.5V,1PF,TPI - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD |
| TDP3500 | Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI |
| TDP4000 | 4 GHz, Differential Probe with TekVPI interface |
| P7504 | Test Probes 4GHz TRIMODE DIFFERENTIAL PROBE |
| P6248 | PROBE; 1.7GHZ DIFFERENTIAL - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD |
| TDP7704 | 4 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface |
| TDP7706 | 6 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface |
| P7506 | Oscilloscope Probe, Differential, 6 GHz, 15 V, 5:1, 12.5:1 |
| TDP7708 | 8 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface |
| P7708 | 8 GHz TriMode Probe with TekFlex connector technology, TekConnect interface |
| P7508 | 8GHz TRIMODE DIFFERENTIAL PROBE |
| TDP7710 | 10 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface |
| P7713 | 13 GHz TriMode Probe with TekFlex connector technology, TekConnect interface |
| P7513A | 13GHz TRIMODE DIFFERENTIAL PROBE |
| P7716 | 16 GHz TriMode Probe with TekFlex connector technology, TekConnect interface |
| P7520A | TriMode Differential Probe (20 GHz, 5X / 12.5X) |
| P7516 | TriMode Differential Probe w/ Cal Cert, 16 GHz, TekConnect Interface, P7500 Series |
| P7720 | 20 GHz TriMode Probe with TekFlex connector technology, TekConnect interface |
| P7625 | 25 GHz LOW NOISE TRIMODE PROBE IN CASE WITH ACCESSORIES |
| P7633 | 33 GHz LOW NOISE TRIMODE PROBE IN CASE WITH ACCESSORIES |
SKU
Tektronix Low Voltage Differential Oscilloscope Probes Family
Manufacturer
Tektronix
Model
Tektronix Low Voltage Differential Oscilloscope Probes
Attenuation
Models from 100x, 10x, 1x, 0.1x to 0.25
Bandwidth
Models from 33 GHz to 1 MHz
Input impedance
Models from 1 MΩ / 55 pF to 50 Ω / 0.3 pF
Maximum Voltage
Models from ±25 V (DC + pk AC) to ±5 V (DC + pk AC)
ADA400A Differential Preamplifier Recommended Accessories
| Model | Description |
|---|---|
| P6101B | 1x passive probe (2 recommended) |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
TDP1500 Differential Probe Recommended Accessories
| Model | Description |
|---|---|
| 067-1734-01 | BNC to probe tip adapter |
| 016-1782-00 | Spring loaded grounds |
| 016-1785-00 | TwinFoot™ adapter |
| 016-1786-00 | TwinTip™ adapter |
| 016-1890-00 | VanTip™ adapter |
| 679-5027-00 | IEEE 1394 adapter |
| 067-1701-01 | TekVPI™ cal fixture |
| 016-1783-00 | Short ground contacts |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
TDP3500 & TDP4000 Differential Probes Recommended Accessories
| Model | Description |
|---|---|
| 016-1785-00 | TwinFoot™ adapter |
| 679-5027-00 | IEEE 1394 adapter |
| 067-1701-01 | TekVPI™ cal fixture |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
P6248 Differential Probe Recommended Accessories
| Model | Description |
|---|---|
| 016-1780-00 | Longhorn Via adapter |
| 016-1782-00 | Spring loaded ground |
| 016-1783-00 | Short ground contact |
| 016-1785-00 | TwinFoot™ adapter |
| 016-1786-00 | TwinTip™ adapter |
| 016-1890-00 | VanTip™ adapter |
| 013-0309-00 | Micro Klipclip adapter |
| 003-0675-01 | Adjustment tool |
| 013-0304-00 | P6046/HP1141A probe tip adapter |
| 679-5027-00 | IEEE 1394 adapter |
| TPA-BNC | TPA-BNC (connect the probe to TekVPI oscilloscopes) |
| TCA-BNC | TCA-BNC (connect the probe to TekConnect oscilloscopes) |
| 011-0049-02 | 50 Ω termination |
| 012-0076-00 | 50 Ω BNC cable, 20 in. |
| 015-0572-00 | 50 Ω SMA (F) to BNC (M) adapter |
| 1103 | TekProbe® II Power Supply for interfacing with other BNC instruments |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
P6247 & P6246 Differential Probes Recommended Accessories
| Model | Description |
|---|---|
| 013-0309-00 | Micro Klipclip adapter |
| 013-0304-00 | P6046/HP1141A probe tip adapter |
| 679-5027-00 | IEEE 1394 adapter |
| TPA-BNC | TPA-BNC (connect the probe to TekVPI oscilloscopes) |
| TCA-BNC | TCA-BNC (connect the probe to TekConnect oscilloscopes) |
| 011-0049-02 | 50 Ω termination |
| 012-0076-00 | 50 Ω BNC cable, 20 in. |
| 015-0572-00 | 50 Ω SMA (F) to BNC (M) adapter |
| 1103 | TekProbe® II Power Supply for interfacing with other BNC instruments |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
P7520A, P7516, P7513A, P7508, P7506, P7504 TriMode™ Probes Recommended Accessories
| Model | Description |
|---|---|
| P75PST | TriMode™ Performance Solder Tip |
| P75PDPM | P7500 Series Precision Differential Probing Module P7500 Precision Differential Probing Module Accessory Kit (See 1 through 7 below) |
| P75TC | Tip Cable (1 ps matched pair, 1 each) |
| P75PMT | Probing Module Tip P75PMT Probe Tips Replacement Kit 1 Each (Right and left side) |
| 016-1998-00 | Accessory Kit; Ground Spring, Large 4 Each |
| 016-1999-00 | Accessory Kit; Ground Spring, Small 4 Each |
| 367-0545-00 | Handle, Adapter (Probing Module) |
| 003-1897-00 | G3PO Separator Tool |
| 003-1900-00 | Ground Spring Tool |
| 020-2936-00 | TriMode™ Resistor Solder Tip |
| 020-2944-00 | TriMode™ Extended-resistor Solder Tip |
| 020-3131-00 | TriMode™ Long Reach Solder Tip (20 GHz, 75 Ω tip resistor) |
| 020-3135-00 | TriMode™ Long Reach Solder Tip (20 GHz, 0 Ω tip resistor) |
| 020-2937-00 | Resistor Replacement Kit |
| 020-3118-00 | Solder Tip Ramps, 25 Each |
| 020-2954-00 | Socket Cable |
| 020-2960-00 | Socket Cable, XL |
| 020-2958-00 | TriMode™ High-temperature Tip |
| 020-2955-00 | TriMode™ Micro-coax Tip |
| 020-3022-00 | Nexus Interposer DDR Solder Tip (4 GHz, 75 Ω tip resistor) |
| RTPA2A | RTSA Series TekConnect® Probe Interface |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
P7633 & P7625 TriMode™ Probes Recommended Accessories
| Model | Description |
|---|---|
| P76CA-292 | 2.92 mm Coaxial Adapter |
| P76CA-292C | 2.92 mm Coaxial Adapter with Cables |
| P76CA-SMP | SMP Coaxial Adapter with Cables |
| P76TA | P7500 Tip Adapter |
| P75PST | P7500 TriMode Performance Solder Tip |
| P75TLRST | P7500 TriMode Long Reach Solder Tip |
| 020-2936-00 | P7500 TriMode Resistor Solder Tip |
| 020-2944-00 | P7500 TriMode Extended Resistor Solder Tip |
| 020-3118-00 | Solder Tip Ramps, Kit of 25 |
| 006-8237-00 | Adhesive Tip Tape, Strip of 10 |
| 003-1896-00 | G3PO Bullet Removal Tool |
| 013-0359-00 | G3PO Replacement Bullet Contacts (package of 4) |
| 017-0103-00 | Wire Kit |
| 020-2937-00 | Replacement Resistor Kit |
| NOTE: All P7600 Series probes require a P76CA-SMP, P76CA-292, P76CA-292C, or P76TA adapter for connection to the device under test. These adapters are ordered separately. See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. |
|
P7720, P7716, P7713, P7708 TriMode™ Probes Recommended Accessories
| Model | Description |
|---|---|
| P77STFLXA | Active, solder-in tip with TekFlex connector technology, 20 GHz (5 tips/kit). Each probe ships with two of these solder-in tips as standard accessories. |
| P77STFLXB | Active, 75 Ω solder-in tip with TekFlex connector technology for DDR4/LPDDR4 electrical validation, 15 GHz (5 tips/kit). For use with Nexus Technology XH Series Interposers. |
| P77STCABL | Active, coaxial cable based, solder-in tip with TekFlex connector technology, 20 GHz |
| P77STFLRB | Active, long reach 55 Ω Solder-in tip with TekFlex Connector technology for DDR/LPDDR electrical Validation with interposers, 16 GHz |
| P77STFLRA | Active, long reach solder-in tip with TekFlex connector technology, 20 GHz |
| P77HTFLRA | Active, long reach high temperature solder-in tip with TekFlex connector technology, 20 GHz |
| P77BRWSR | Browser accessory with TekFlex connector technology, 16 GHz |
| P77C292MM | SMA Coaxial adapter with TekFlex connector technology, 20 GHz |
| P77DESKEW | Deskew fixture. Download the instructions from tek.com; search for P77DESKEW. |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
TDP7710, TDP7708, TDP7706,TDP7704 TriMode™ Probes Recommended Accessories
| Model | Description |
|---|---|
| P77STFLXA | Active, solder-in tip with TekFlex connector technology, 20 GHz (5 tips/kit). Each probe ships with two of these solder-in tips as standard accessories. |
| P77STFLXB | Flex circuit based DDR4/LPDDR4 memory solder in tips. These tips use flex circuit material and provide soldered, multi-point connections. They support full TriMode measurement capabilities and full probe bandwidth, 15 GHz (5 tips/kit). |
| P77STCABL | Active, coaxial cable based, solder-in tip with TekFlex connector technology, 20 GHz |
| P77BRWSR | Browser accessory with TekFlex connector technology, 16 GHz |
| P77C292MM | SMA Coaxial adapter with TekFlex connector technology, 20 GHz |
| See datasheet for more details, model specific oscilloscope compatibility, and standard accessories included. | |
Add extended service and calibration
Optimize the lifetime value of your purchase and lower your total cost of ownership with a calibration and extended warranty plan for your instrument.
Plans range from standard warranty extensions covering parts, labor, and 2-day shipping to Total Product Protection with repair or replacement coverage from wear and tear, accidental damage, ESD or EOS. See the table below for specific service options available.
Extended service and calibration options
| Service Option | Description | |
|---|---|---|
| Warranty Extension | ||
| R3 | Standard warranty extended to 3 years. Covers parts, labor and 2-day shipping within country. Guarantees faster repair time than without coverage. All repairs include calibration and updates. Hassle free - a single call starts the process. | Contact Testforce Sales Office. |
| R5 | Standard warranty extended to 5 years. Covers parts, labor and 2-day shipping within country. Guarantees faster repair time than without coverage. All repairs include calibration andupdates. Hassle free - a single call starts the process. | |
| Gold Care Plans* | ||
| G3 | Three Year Gold Care Plan. Includes expedited repair of all product failures including ESD and EOS, access to a loaner product during repair or advanced exchange to reduce downtime, priority access to Customer Support among others | Contact Testforce Sales Office. |
| G5 | Five Year Gold Care Plan. Includes expedited repair of all product failures including ESD and EOS, access to a loaner product during repair or advanced exchange to reduce downtime, priority access to Customer Support among others | |
| Calibration Coverage | ||
| C3 | Option C3: Calibration service 3 years.Includes traceable calibration or functional verification where applicable, for recommended calibrations. Coverage includes the initial calibration plus 2 years calibration coverage. | Contact Testforce Sales Office. |
| C5 | Option C5: Calibration service 5 years.Includes traceable calibration or functional verification where applicable, for recommended calibrations. Coverage includes the initial calibration plus 4 years calibration coverage. | |
| Data Reports | ||
| D1 | Calibration Data Report | Contact Testforce Sales Office. |
| D3 | Calibration Data Report 3 Years (with Option C3) | |
| D5 | Calibration Data Report 5 Years (with Option C5) | |
| * Some models. See datasheet for more details | ||
Contact Us for details